To connect walls to structures or to each other

Flat pre-perforated connector

Cod. ATFOR
cm 30 (length)

It allows the mechanical connection between walls or between walls and load-bearing structures, ensuring maximum safety in the event of seismic events

Shock-absorbing band for joints

Cod. ATSTR
cm 300 (length)
cm 10 (width)
cm 2 (thickness)

It allows the creation of an elastic joint between the load-bearing structure and the infill walls, ideal for absorbing settlements and stresses avoiding imperfections on the walls.

To reinforce the masonry by reinforcing the mortar joints

Wire mesh tape for reinforcing jointsMURFOR COMPACT

Spess. = 190 mm

cod. ACMUR190

MURFOR EFS/Z Truss

cod. ACMURA40 – A40 (sp. 40mm)
cod. ACMURA80 – A80 (sp. 80mm)

It allows to reinforce the mortar joints and give greater rigidity to the wall, allowing it to better distribute stresses and concentrated loads and avoiding surface cracks and imperfections.

Fixing systems

Safety retaining hooks for light coatings

Cod. FIXTILE5
for coatings less than 6 mm thick
Cod. FIXTILE7
for coatings from 6 to 7.99 mm thick
Cod. FIXTILE9
for coatings with a thickness greater than 8 mm

X3 - anchors with TER screw for fixing ventilated facades on GASBETON®

Cod. X310X100R 10×100

X3 - anchors with TPS screw for fixing windows on GASBETON®

Cod. X310X100 10×100
Cod. X310X120 10×120
Cod. X310X140 10×140
Cod. X310X160 10×160

TML - dowels for fixing light loads on GASBETON®

Cod. TML50 sviluppo 50 m
Cod. TML60 sviluppo 60 m
Cod. TML70 sviluppo 70 m

Hex wrench for dowels TML

Cod. TML50KEY
M6 for dowels TML 50
Cod. TML60KEY
M8 for dowels TML 60
Cod. TML70KEY
M10 for dowels TML 70

FISCHER fixing systems

On GASBETON® masonry, it is possible to fix any type of load using suitable dowels.

For details and capacity values, visit www.fischeritalia.it
www.fischeritalia.it

Other products


Blocks

Mortars and Adhesives

Equipment